Pick your handle (sold seperately)

1. Pick your handle (sold seperately)
2. Insert the waver into your handle until you hear the 'click' and the button on the side pops out indicate the barrel is secure
3. Once the barrel is fitted correctly, it should not be possible to remove the barrel from the handle wihtout pressing the release button located on the side of the handle
4. Turn on the handle using the ON/OFF switch and allow up to 60 seconds for the barrel to reach optimum temperature - a light will show to indicate the curling wand is on
5. The barrel will get hot so recommend to use the Heat Proof Glove provided for extra protection against the heat when styling
6. Take a small section of hair and spray with a Heat Protection Spray, then open the clamp and place the hair into the waver - hold for 10 to 15 seconds (dependant on hair thickness) - and repeat on the next section.
7. Top tip - alternate using the waver upside down to create more variety in your waves and also use the waver at a slight angle, gently clamping at the top to avoid a line appearing in the hair
8. Ensure you use a heat resistant mat or surface when using the curling wand - make sure any surfaces the wand is placed on will not be damaged by heat
9. Once finished, turn the wand off and unplug from the mains, allowing it to cool one a heat resistant surface before removing or changing the barrel
10. Use either your fingers or a wide tooth comb (not a brush!) to gently release & define your waves
11. Finish with a hairspray to set your look in place

• Cool Tip
• Reaches up to 190 Degrees
• 3 x Ceramic coated 21mm barrels
• Creates S-Waves
• Easy to use clamp to hold hair in place
• Compatible with all handles
• Handle sold separately